







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Kendall Homeowners Choose Belgard Construction
We’re an independent Belgard service provider working across Kendall, FL, installing and repairing Belgard paver driveways, patios and retaining walls. What sets our Belgard work apart is base prep: we grade and compact the sub-base for South Florida rain, so the pavers stay put instead of settling and blooming white. Every project begins with a free written estimate, and we’re licensed and insured.
Belgard is a hardscape brand – concrete pavers, retaining-wall blocks and the matching caps and joint sand that go with them. We’re not affiliated with or authorized by Belgard, and we don’t present ourselves as a dealer. We’re independent, which means we can tell you honestly whether your existing Belgard installation needs a repair or a rebuild, and we can specify the right unit for the job without pushing a program. If you own Belgard pavers or a Belgard wall in Kendall, that independence is worth something.
Most of Kendall’s housing went up in the 1990s and 2000s under Miami-Dade’s strict wind-load and product-approval rules, so outdoor work here is dominated by permitted, code-compliant builds. A paver driveway or wall has to be planned around the same permitting and notice-of-acceptance reality as anything else on the property. Call (888) 300-8968 to talk through your Belgard project. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Kendall Construction Co for Your Belgard Construction?

Our technicians have up to 14 years of experience with hardscape installation, and they’ve worked with Belgard systems long enough to know how each one behaves under South Florida conditions. That’s the practical difference. Belgard pavers are dense and dimensionally consistent, which is good – but they only perform as well as what’s under them. A technician who has pulled apart failed installations knows the signs: settlement that follows the drive path, sand loss at the joints after summer rain, efflorescence that comes back season after season.
We use quality parts that fit Belgard equipment. That means Belgard’s own matching units, caps and color-matched polymeric sand so repairs blend into the existing field, border and soldier course. We don’t claim to stock OEM or genuine Belgard parts, and we’re not a Belgard dealer. What we do is install and service Belgard hardscape with parts made for it, and we choose them with warranty in mind – matching products, correct base prep, and proper joint sand all protect the integrity of an existing installation. When we quote a Belgard repair or install in Kendall, the written estimate sets the final price, so you know what you’re getting before anyone breaks ground.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Kendall
Belgard pavers and walls fail for predictable reasons in this climate. Here are the ones we see most often in Kendall, and what’s actually behind them.
- Efflorescence and salt bloom on Mega-Lafitt and Catalina pavers. That white haze isn’t a defect in the paver – it’s mineral salts migrating to the surface as water moves through the concrete. It shows up where the base wasn’t graded for drainage and moisture sits under the joints. Cleaning the surface without fixing the drainage means it returns after the next rainy season.
- Polymeric sand washing out of wide joints on Lafitt Rustic Slab drives. Heavy summer downpours push joint sand out of the wider gaps on these pavers, and once the sand is gone, weeds and ants move in. It’s a drainage and joint-fill problem, not a paver problem.
- Settlement and lippage on patios and driveways. Wavy, uneven surfaces where one paver sits higher than its neighbor usually trace back to a sub-base that was too thin or wasn’t compacted in lifts. The pavers themselves are fine; the ground under them moved.
- Retaining-wall block movement on Weston Stone and Brighton Wall courses. When courses bulge or lean, the cause is almost always missing geogrid and drainage gravel behind the wall. Soil pressure and water have nowhere to go, so the wall pushes forward.
- Border and soldier-course separation. The edge restraints and border units are what hold a field together. When they’re under-built or the edge restraint was never secured, the outer course drifts and the whole pattern loosens from the perimeter inward.
A Belgard paver driveway or patio several years old typically shows wavy settlement along the drive path, sand loss at the joints, and white efflorescence patches that return after each rainy season. The usual cause is a thin or poorly compacted base and no positive slope away from the house, not the pavers themselves. A qualified local pro pulls and stacks the Belgard units, re-excavates and recompacts the base in lifts with correct slope, resets the border and soldier course, then re-sands with polymeric sand and seals only if the surface is fully cured and dry. That’s the honest fix when a field has failed at the base – patching surface units just means they move again.
Belgard Parts & Our Repair-vs-Replace Approach

The repair-or-replace decision comes down to where the failure started. If the pavers are sound and the problem is joint sand, efflorescence or a few settled units, a targeted repair makes sense – pull the affected area, correct the base beneath it, reset the matching Belgard units and re-sand. If a wall or a large field has failed at the base, rebuilding the base is the right call, not surface patching.
We use Belgard’s own matching units, caps and color-matched polymeric sand so courses, borders and repairs blend into what’s already there. We don’t claim to stock OEM or genuine Belgard parts, and we’re not a dealer. What we bring is an honest assessment: we’ll tell you when a repair will hold and when it won’t. If you’re weighing a fix against a full replacement on a Belgard driveway or wall in Kendall, call (888) 300-8968 for a free estimate and a straight answer.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We look at the whole installation – slope, drainage, joint condition, base compaction and, on walls, what’s happening behind the block. We identify whether the failure is at the surface or in the base, because that determines everything that follows.
- 2
Repair or install. For a repair, we pull the Belgard units, correct the base and reset with matching units and color-matched polymeric sand. For a new install, we excavate, compact the base in lifts, set edge restraints and lay the field, border and soldier course to the pattern you’ve chosen.
- 3
Test. We check slope and drainage with water, confirm joints are filled evenly, and verify the border and any wall drainage are doing their job before we call it done.
- 4
Warranty. We walk the finished work with you, explain how to maintain the joints and surface, and put the scope in writing so the record is clear.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Kendall

We install and service Belgard paver driveways and paver patios, including the Mega-Lafitt, Lafitt Rustic Slab, Catalina Grana, Catalina Slate, Dublin Cobble and Urbana paver lines. We also work with Belgard’s Weston Stone and Brighton Wall retaining-wall blocks and the matching caps.
That covers the three jobs we do most in Kendall: paver driveway installation, paver patio installation and driveway replacement. If your project involves re-sanding, sealing, border repair or a full rebuild over a corrected base, we handle that too. We don’t claim to stock product – we specify the right Belgard unit for your job and install it correctly over a base built for this climate’s rain.
We Also Service These Brands
Belgard is one brand in a much larger portfolio. We also work with KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems and PGT windows and doors, among more than 50 product lines across seven trade categories. That range means you’re not boxed into one manufacturer – and when a Belgard project is part of a larger exterior refresh, you can keep the same contractor for the whole scope instead of coordinating several.
FAQs – Belgard Construction Service in Kendall
No. We’re an independent Belgard service provider, not a Belgard dealer, and we’re not affiliated with or authorized by the manufacturer. We install and repair Belgard hardscape with quality parts that fit it, and our independence lets us give you an honest repair-or-replace recommendation. Call (888) 300-8968 for a free estimate.
Yes. We use Belgard’s own matching units, caps and color-matched polymeric sand so repairs blend into existing fields and borders. We don’t claim to stock OEM or genuine Belgard parts, and we’re not a dealer – but the products we use are made to fit the installation and protect its integrity.
A targeted repair can often be handled in a short visit, while a full driveway or patio rebuild with a corrected base takes longer. The timeline depends on the size of the field, the condition of the base and whether permits are involved. We lay out the scope and timing in your written estimate so there are no surprises.
We cover Belgard paver driveways and patios, including the Mega-Lafitt, Lafitt Rustic Slab, Catalina Grana, Catalina Slate, Dublin Cobble and Urbana lines, plus Weston Stone and Brighton Wall retaining-wall blocks and caps. If you’re not sure which product you have, call (888) 300-8968 and we’ll help identify it.
Yes, often it can. If the pavers are sound and the problem is localized settlement, sand loss or efflorescence tied to drainage, we pull the affected area, correct the base beneath it and reset the matching Belgard units. A full replacement only makes sense when the base has failed across the whole field. Call (888) 300-8968 for an honest assessment – estimates are free.
Efflorescence returns because moisture is still moving through the pavers from below, usually where the base wasn’t graded for drainage. Cleaning the surface alone won’t stop it. Fixing the drainage and slope underneath is what ends the cycle. Call (888) 300-8968 and we’ll take a look at what’s driving it.
Geogrid and drainage gravel behind the wall are what hold it. Without them, soil pressure and trapped water push the courses forward until they bulge or lean. We rebuild failed walls with proper reinforcement and drainage, not surface patching. Call (888) 300-8968 for a free estimate.
Polymeric sand is usually the better choice in South Florida, because heavy summer rain washes plain joint sand out of wide joints quickly. Polymeric sand locks the joints and resists washout, so weeds and ants have a harder time taking hold. We use color-matched polymeric sand so the joints match your field.
Usually yes, within manufacturing variation. We match the existing Belgard unit as closely as possible and use color-matched polymeric sand so the repair blends in. Older installations can shift slightly in color, so we’ll tell you what to expect before we start. Call (888) 300-8968 to talk through your match.
Not if the work is done correctly. Matching products, proper base prep and the right joint sand all protect the integrity of an existing installation. We don’t work against the manufacturer’s specifications, and we’ll be clear about what the warranty covers and what falls to skilled installation. Call (888) 300-8968 with questions.
Belgard paver work in Kendall typically falls into the ranges below. These are estimates – the written estimate sets the final price, and we quote per job with no change orders once work begins.
| Service | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Sealing | $250 – $700 |
Call (888) 300-8968 for an exact quote – estimates are free.
Book Your Belgard Service in Kendall, FL
If your Belgard paver driveway, patio or retaining wall needs a repair, a rebuild or a fresh install built for South Florida rain, we can help. We’re an independent Belgard service provider, licensed and insured, working with quality parts that fit the installation. Estimates are free, and the written quote sets the price. Call (888) 300-8968 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Kendall Construction Co.












