







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Kendall Homeowners Choose PGT Construction
We provide independent PGT construction service in Kendall: installation, repair and replacement of PGT impact and non-impact windows and doors, done to Miami-Dade product-approval standards. What makes our PGT work different is the detail level – the anchoring embedment, sill-pan back-damming and flashing that decide whether a rated opening actually performs and whether its warranty holds. We are an independent PGT service provider, not affiliated with or authorized by the manufacturer. Call (888) 300-8968 for a free estimate.
Why Trust Kendall Construction Co for Your PGT Construction?

Our technicians have up to 14 years of experience, and much of that time has been spent in Kendall’s CBS-and-stucco housing stock, where a window goes into concrete block, not wood frame. That changes what a correct install looks like: approved fasteners set to proper embedment depth, shims that don’t crush the frame, and flashing that laps and back-dams the rough opening rather than getting caulked over and forgotten.
The PGT line itself has been built in Florida since 2012, which means the product line is deep and the installation standards behind a valid product approval are specific. We work from those standards, not from habit. We repair, install and service PGT equipment with quality parts that fit it. We’re not factory-trained or certified by PGT and we don’t present ourselves that way – we’re an independent shop that knows this product family well.
Warranty-safe practice sits at the center of everything. That means keeping the product approval label intact, matching replacement units to the opening they serve, and documenting the install so the paper trail supports the claim if one ever comes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Kendall
South Florida heat and humidity are hard on windows and doors, and the failures below are the ones we see most across Kendall. None of them are mysterious once you know what causes them.
- Fogged or hazy insulated glass. The edge seal on an insulated unit breaks down under constant heat and humidity cycling, and moisture works in between the panes. Homeowners describe a haze or condensation they can’t wipe away – that’s a failed seal, not dirt, and the glass unit has to be replaced.
- Water intrusion at sill pans and rough openings. Sliders and window units leak when the installer skipped back-damming at the sill or used the wrong flashing tape under the nailing fin. The water shows up inside the track after heavy rain, and by then it’s usually been traveling for a while.
- Hardware and roller drag. Heavy impact sliders and casement operators take on corroded rollers, worn hinges and latch points that stop pulling the sash tight. A slider that gets harder to open every year is telling you the rollers are done.
- Anchoring failures after storm cycles. Loosened fasteners show up where units were set with short or improperly placed fasteners into block or stucco instead of approved embedment. A window that rattles in wind is a window that isn’t anchored correctly.
- Tile roofs reaching end of life. Karen homes in Kendall’s 1990s-2000s subdivisions often have tile roofs at the end of their service life, and insurers increasingly want documented age or a full replacement before they’ll bind a policy. Leaks around a window or door reveal aren’t always glass problems – sometimes the roof flashing above is the real source.
PGT Parts & Our Repair-vs-Replace Approach

For impact-rated openings, factory PGT glass, sashes, rollers and hardware are the right call. The product approval, the label and the pressure rating have to stay intact, and aftermarket substitutions put all three at risk. For non-rated interior and service work, quality aftermarket seals and operators are a reasonable path.
Our rule on replacement is simple: when the glass seal or the frame is compromised, the unit gets replaced. Patching a failed insulated unit on a rated opening usually costs nearly as much and forfeits the rating, which is a bad trade in a hurricane-zone county. When the frame and glass are sound and the problem is hardware, a roller or lock set is the smarter spend.
We don’t stock or carry OEM or PGT-branded parts, and we don’t claim to – we source what fits the equipment. Call (888) 300-8968 and we’ll tell you which side of the line your window falls on, with a free written estimate.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We verify the product approval label, check the glass seal, inspect the sill pan and flashing, and test rollers, locks and anchor embedment. This is how we separate a glass problem from an installation problem before anyone spends money.
- 2
Repair or install. Failed insulated glass or sashes get switched for matching PGT units. Sills and flashing get reworked with proper back-damming. New installs go in with approved fasteners at correct embedment into block or stucco.
- 3
Test. We operate every slider and casement, confirm the sash pulls to a tight seal, check for water tracking at the track and verify the opening is weather-tight and drains correctly.
- 4
Warranty and documentation. Labels stay intact, the install record is kept, and we walk you through what the manufacturer warranty covers versus what our own workmanship covers.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Kendall

We work on the full range of PGT impact and non-impact products without being tied to the manufacturer’s retail channel. That includes PGT WinGuard Aluminum Impact-Resistant Windows, PGT WinGuard Vinyl Impact Windows & Doors, PGT Premier Series Aluminum Windows, and PGT Custom Vinyl Sliding Glass Doors.
In practice that covers impact window installation, window replacement, and the roof repair work that so often sits behind what looks like a window leak in a Kendall home. Non-impact aluminum and vinyl units, sliders and casements all fall within our scope.
We Also Service These Brands
We’re multi-brand by design, not locked to a single product line. Alongside PGT, we work with KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems and Master Halco fencing, across seven trade categories from driveway and pavers to kitchen remodeling. If your project touches more than one of them, one contractor can carry it.
FAQs – PGT Construction Service in Kendall
No. We’re an independent PGT service provider, not affiliated with, authorized by or certified by the manufacturer. That independence means we work on the full product range without channel constraints, and we’ll tell you plainly when a manufacturer warranty claim should go through PGT directly.
Yes, in most cases. A single fogged pane is a failed insulated glass seal, and the glass unit or sash can be swapped while the frame stays in place. We verify the approval label first and match the replacement to the opening. Call (888) 300-8968 for an exact quote – estimates are free.
The warranty depends on installation meeting the product approval and manufacturer’s published requirements, not on using one particular company. Correct anchoring, flashing and sill detailing are what protect the claim. We document the install so the paper trail supports it.
Corroded rollers and worn hardware are the usual cause. Heavy impact sliders carry a lot of weight, and South Florida humidity is unkind to the roller assemblies. Replacing the rollers and adjusting the track restores smooth operation; if the frame is also compromised, replacement is the better call.
It can be either, and that’s why diagnosis matters. Water tracking inside the track after heavy rain often points to a failed seal combined with sill-pan or flashing detailing that was never back-dammed at install. Water appearing high on the wall or at the ceiling often traces to roof flashing above the opening instead. We check both before quoting.
Lead time depends on the product and the current order queue, and impact units aren’t stock items. We confirm the timeline with you in the written estimate rather than guessing. Call (888) 300-8968 for an exact quote – estimates are free.
Typical estimated ranges for the work most Kendall homeowners need are below. These are estimates only – the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Call (888) 300-8968 for an exact quote – estimates are free.
Book Your PGT Service in Kendall, FL
Whether it’s a fogged WinGuard unit, a slider that won’t glide, or a full impact window installation, we’ll diagnose it properly and give you a written estimate before any work starts. Call (888) 300-8968. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Kendall Construction Co.












